MS51066E
NOTES:
1. Dimensions are in inches.
2. Metric equivalents are given for information only.
3. The Part or Identifying Number (PIN): shall consist of the MS sheet number plus the length dash number when a plain based belt is required, the dash (-) shall be deleted and code letter "P" shall be added. When a notched or cogged based belt is required, the dash shall be deleted and the code letter "C" shall be added. When grade "B" belts are required, the letter "B" shall be added after the length dash number. When a matched set of belts is required, a second dash number shall be included after the base, length, and grade dash number.
4. Oil-Resistance, as specified in MIL-DTL-11040 when oil-resistance is specified, the PIN shall include the letter "R".
5. Belt lengths as specified and are in terms of effective length as measured in accordance with the acquisition specification. These lengths cannot be compared to inside or outside circumference measurements.
6. Plain and notched (cogged) base belts are completely interchangeable on most drives when a plain or notched (cogged) base belt is specifically required. The user shall forward to the procuring activity information to substantiate the particular base configuration drive configuration, pulley sizes, rpm of driver pulley, horsepower requirements of each driven pulley, ambient temperature in which belt must operate, item belt is used on, and other pertinent information.
7. MS51066 belts (MIL-DTL-11040) are -65°F, use (-54°C) belts if -65°F is not a requirement of the end item, do not use this specification conform to A-A-52155 belts.
8. For design feature purposes, this specification takes precedence over procurement documents referenced herein.
9. Referenced documents shall be of the issue in effect on date of invitations for bids, or request for proposal, except that referenced adopted industry documents shall give the date of the issue
adopted.
Examples:
Single belt, option of plain, notched or cogged, grade A MS51066 - 30
Effective Length
MS number
Single belt, plain based, grade B
MS51066 P 30 B
Grade B Effective Length Plain base
MS number
FIGURE 1. V, belt: engine accessory drive - Continued.
2
For Parts Inquires submit RFQ to Parts Hangar, Inc.
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business