A-A-52155B
3.6 Identification and markings. Identification and markings of the belts shall be permanent and legible. The belts shall be marked on the outside circumference. Each belt shall be marked with the nominal top width, the effective length, the contractors identification code (CAGE) or trademark, the date of manufacture.
3.6.1 Matched sets. Each belt in a matched set shall be marked as specified in 3.6. In addition, all belts of a matched set shall be tied together. A tag or separate label shall include the following notice: "WARNING: THIS IS A MATCHED SET. DO NOT BREAK TIES EXCEPT AT INSTALLATION."
4. REGULATORY REQUIREMENTS. The offeror/contractor is encouraged to use recovered materials to the maximum extent practicable, in accordance with paragraph 23.403 of the Federal Acquisition Regulation (FAR).
5. PRODUCT CONFORMANCE. The products provided shall meet the salient characteristics of this CID, conform to the producer's own drawings, specifications, standards, and quality assurance practices, and be the same product offered for sale in the commercial marketplace. The Government reserves the right to require proof of such conformance.
5.1 Responsibility for inspection. The contractor is responsible for the performance of all inspections (examinations and tests).
6. PACKAGING. Preservation, packing, and marking shall be as specified in the contract or order (see 7.3).
7. NOTES.
7.1 Part or Identification Number (PIN). The following PIN procedure is for Government purposes and does not constitute a requirement for the contractor. The PINs to be used for V-Belts acquired to this CID are created as follows:
5
For Parts Inquires submit RFQ to Parts Hangar, Inc.
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business