An Integrated Publishing, Inc. Site

An Integrated Publishing Website

Belting Drive Belts Fan Belts Access - FSC 3030

A-A-51644 - Belt, Round, (Engine)

This Commercial Item Description covers four round, all cord, dental engine belts suitable for power transferred from dental engines to dental handpieces.

A-A-52155 - Engine Accessory Drive V-Belts

This CID covers requirements for standard and heavy duty V-type engine accessory drive belts of various lengths and belt widths. The belts are either plain or notched or cogged base.

A-A-52160 - Industrial V-Belts (Multiple Drive)

This commercial item description (CID) covers the general requirements for V-type industrial drive belts. V-type industrial drive belts covered by this CID are intended for commercial/industrial applications.

A-A-52422 - Belts, V: Industrial Drive, Narrow Type

This CID covers endless, narrow, sIngle and multiple-drive V-belts of three different cross-sectional designations and of various lengths within each designation. The belts are used in transmitting power in industrial applications.

A-A-52490 - Belts, V: Light-Duty Or Fractional-Horsepower

This CID covers requirements for stock power transmission, light-duty, endless V-type belts. The V-belts are for use with fractional-horsepower engines or motors that use small diameter pulleys on drives which generally require a single belt. The V-belts are intended for intermittent or infrequent use, rather than continuous operation. Typical applications are: shop equipment, blowers, and centrifugal pumps.

DDD-B-166 - Belting, Conveyor Or Power&Transmission, Narrow (Stitched&Duck)

DDD-B-171 - Belting, Conveyor Or Power Transmission (Stitched Duck)

DOD-B-53061 - ( Images) Belts, V: Polyurethane

This specification covers polyurethane, V-type, power transmission belts.

JJ-B-00178 - Belts, Round, Dental Engine (S/S By A-A-51644)

JJ-B-178 - Belt, Round (Dental Engines) (S/S By A-A-51644)

This specificaiton covers round, all cord dental-engine belts of various lengths for transmitting power from dental engines to dental handpieces.

JJ-B-191 - Belting, Flat, Conveyor Or Power Transmission, Cotton (Solid Woven)

KK-B-201 - Belting, Flat, Leather, Vegetable-Tanned

KK-B-211 - Belting, Round, Leather

MIL-B-52761 - Belting, Flat, Conveyor, Rubber Industrial Synthetic Reinforcement

This specification covers rubber textile-reinforced conveyor belting made for uninterrupted transportation of packaged articles and bulk materials.

MIL-B-52919 - Belts, V: Industrial Drive, Narrow Type (S/S By A-A-52422)

This specification covers endless, narrow, single-and multiple-drive V-belts.

MIL-DTL-11040 - Belt, V: Engine Accessory Drive, General Specification For

This specification covers general requirements for standard and heavy duty endless V-type engine accessory drive belts of various lengths and belt widths. The belts are either plain or notched or cogged base.

MIL-STD-294 - Visual Inspection Guide For Rubber V Belts

This standard covers only visible defects for V-belts, that have a trape- zoidal cross-section, manufactured with natural or synthetic rubber compounds and rein- forced with cord, fabric or wire. Power is transmitted through the nonparallel sides of the belt. Timing belts or belts that transmit power through the inner face or bottom are excluded.

MS39240 - ( Images) Belts, V: Fractional Horsepower (2L Or 6R Cross-Sectional Designation) (S/S By A-A-52490)

MS39241 - ( Images) Belt, V: Fractional Horsepower (3L And 9R Cross-Sectional Designation) (S/S By A-A-52490)

MS39242 - ( Images) Belt, V: Fractional Horsepower (4L And 13R Cross-Sectional Designation) (S/S By A-A-52490)

MS39243 - ( Images) Belt, V: Fractional Horsepower (5L Or 16R Cross-Sectional Designation) (S/S By A-A-52490)

MS39255 - ( Images) Belts, V: Industrial (Multiple Drive) "A" And "13C" Cross Section (S/S By A-A-52160)

MS39256 - ( Images) Belt, V: Industrial (Multiple Drive) "B" And "16C" Cross Section (S/S By A-A-52160)

MS39257 - ( Images) Belt, "V": Industrial (Multiple Drive) "C" And "22C" Cross Section (S/S By A-A-52160)

MS39258 - ( Images) Belts, V: Industrial (Multiple Drive) "D" And "32C" Cross Section (S/S By A-A-52160)

MS39259 - ( Images) Belts, V: Industrial (Multiple Drive) "E" Cross Section

MS39260 - ( Images) Pulley, Industrial (Multiple Drive) Standard Deep And Narrow Groove

MS39277 - ( Images) Belts, "V": Industrial (Narrow Type), "3V" And "9N" Sectional Designation (S/S By A-A-52422)

MS39278 - ( Images) Belts, "V": Industrial (Narrow Type), "5V" And "15N" Sectional Designation (S/S By A-A-52422)

MS39279 - ( Images) Belts, "V": Industrial (Narrow Type), "8V" And "25N" Sectional Designation (S/S By A-A-52422)

MS39281 - ( Images) Belting, Rubber Covered, Conveyor, Ditching Machine, Discharge With Cleats And Guide Strip, Fully Molded

MS51065 - ( Images) Belt, V: Engine Accessory Drive (0.380 Inch Width)

MS51066 - ( Images) Belts, V: Engine Accessory Drive (0.500 Inch Width)

MS51067 - ( Images) Belts, V: Engine Accessory Drive (0.688 Inch Width)

MS51068 - ( Images) Belts, V: Engine Accessory Drive (0.750 Inch Width)

MS51069 - ( Images) Belts, V: Engine Accessory Drive (0.875 Inch Width)

MS51070 - ( Images) Belts, V: Engine Accessory Drive (1.000 Inch Width)

QPL-11040-14 - Belt, V, Engine Accessory Drive (Replaced By The Qualified Products Database (Qpd) See Notice 1 For Additional Information)

QPL-ZZ-B-190-3 - Belt, V. Engine Accessory Drive

QPL-ZZ-B-225-7 - Belts, V: Engine Accessory Drive; Minus 40 Deg. F.

RMA-IP20 - V-Belt And Sheaves, Classical, Specification For Drives Using

This standard covers the four cross sections of V-belts and sheaves designated A, B, C, and D which are generally used in multiple sets for industrial power transmission applications.

RMA-IP22 - Drives Using Narrow V-Belts And Sheaves, Specification For

This standard covers the three cross-sections of V-belts and sheaves designated 9N, 15N, and 25N in the metric system and 3V, 5V, and 8V in the inch-pound system.